| KR40(VR - AC)(480VAC) |
固態繼電器 ( S.S.R )
|
KR4010AX |
KR4015AX |
KR4025AX |
KR4040AX |
KR4050AX |
KR4075AX |
KR4090AX |
KR 系列 |
|
|
| |
|
| 規格說明： |
|
型號. |
控制電
壓範圍 |
釋放電壓 |
投入電阻
|
最大負
電流 |
負電壓
範圍 |
最小破壞
電壓 |
開路時洩
漏電流 |
頻率
範圍 |
最大瞬間
承受電流 |
目錄下載 |
KR4010AX |
VR 0~1M KΩ |
MAX10VAC |
1.5Kohm |
10A |
48~480VAC |
1200VAC |
15mA |
47~70Hz |
100A |
|
KR4015AX |
VR 0~1M KΩ |
MAX10VAC |
1.5Kohm |
15A |
48~480VAC |
1200VAC |
15mA |
47~70Hz |
150A |
KR4025AX |
VR 0~1M KΩ |
MAX10VAC |
1.5Kohm |
25A |
48~480VAC |
1200VAC |
15mA |
47~70Hz |
260A |
KR4040AX |
VR 0~1M KΩ |
MAX10VAC |
1.5Kohm |
40A |
48~480VAC |
1200VAC |
15mA |
47~70Hz |
400A |
KR4050AX |
VR 0~1M KΩ |
MAX10VAC |
1.5Kohm |
50A |
48~480VAC |
1200VAC |
15mA |
47~70Hz |
500A |
KR4075AX |
VR 0~1M KΩ |
MAX10VAC |
1.5Kohm |
75A |
48~480VAC |
1200VAC |
15mA |
47~70Hz |
750A |
KR4090AX |
VR 0~1M KΩ |
MAX10VAC |
1.5Kohm |
90A |
48~480VAC |
1200VAC |
15mA |
47~70Hz |
900A |
|
| |
型號. |
瞬間電壓
變化率 |
通電之後
下降電壓 |
絕緣電阻 |
介質耐壓
輸入 - 輸出 |
輸出 / 入端 對外殼
的瞬間耐壓強度 |
動作時間 |
釋放時間
|
容量進出 |
重量 (g) |
KR4010AX |
1000  sec |
2.0VACrms |
 ohm |
4000 VACrms |
2500 VACrms |
少於 2 mSec |
少於 1/2 循環 |
少於 15 PF |
95 g |
KR4015AX |
1000 sec |
2.0VACrms |
ohm |
4000 VACrms |
2500 VACrms |
少於 2 mSec |
少於 1/2 循環 |
少於 15 PF |
95 g |
KR4025AX |
1000 sec |
2.0VACrms |
ohm |
4000 VACrms |
2500 VACrms |
少於 2 mSec |
少於 1/2 循環 |
少於 15 PF |
100 g |
KR4040AX |
1000 sec |
2.0VACrms |
ohm |
4000 VACrms |
2500 VACrms |
少於 2 mSec |
少於 1/2 循環 |
少於 15 PF |
100 g |
KR4050AX |
1000 sec |
2.0VACrms |
ohm |
4000 VACrms |
2500 VACrms |
少於2 mSec |
少於 1/2 循環 |
少於 15 PF |
100 g |
KR4075AX |
1000 sec |
2.0VACrms |
ohm |
4000 VACrms |
2500 VACrms |
少於 2 mSec |
少於 1/2 循環 |
少於 15 PF |
100 g |
KR4090AX |
1000 sec |
2.0VACrms |
ohm |
4000 VACrm |
2500 VACrms |
少於 2 mSec |
少於 1/2 循環 |
少於 15 PF |
100 g |
|
| |
| 外形尺寸圖 ( 單位:mm) |
 |
| EQUIVALENT CIRCUIT |
 |
| |
| 特有曲線圖 |
 |
| Attention: |
|
In order to be in compliance with the EMC
Directive an additional X2 capacitor at the
output is requried if the SSR is operated as
single component. In case the SSR is
incorporated in an appliance the existing
EMI filter may provide the required EMI
suppresion. The X2 capacitor must be
placed as close as possible to the output |
| temminats. See also above. |
|
 |
 |
 |
|
