| KL20(AC - AC)(280VAC) |
| |
|
固態繼電器 ( S.S.R ) |
KL20C10AX |
KL20C15AX |
KL20C25AX |
KL20C40AX |
KL20C50AX |
KL20C75AX |
KL20C90AX |
KL20C100AX |
KL20C125AX |
KL 系列 |
|
|
| |
| 規格說明： |
型號. |
控制電壓範圍 |
釋放電壓 |
投入電阻
|
最大負電流 |
負電壓範圍 |
最小破
壞電壓 |
開路時洩
漏電流 |
頻率範圍 |
最大瞬間
承受電流 |
目錄下載 |
KL20C10AX |
80 TO 280 VAC |
MAX 10 VDC |
1.5 Kohm |
10 A |
24-280VAC |
600VAC |
少於 5 mA |
47~70Hz |
100 A |
|
KL20C15AX |
80 TO 280 VAC |
MAX 10 VDC |
1.5 Kohm |
15 A |
24-280VAC |
600VAC |
少於 5 mA |
47~70Hz |
150 A |
KL20C25AX |
80 TO 280 VAC |
MAX 10 VDC |
1.5 Kohm |
25 A |
24-280VAC |
600VAC |
少於 5 mA |
47-70Hz |
250 A |
KL20C40AX |
80 TO 280 VAC |
MAX 10 VDC |
1.5 Kohm |
40 A |
24-280VAC |
600VAC |
少於 5 mA |
47-70Hz |
400 A |
KL20C50AX |
80 TO 280VAC |
MAX 10 VDC |
1.5 Kohm |
50A |
24-280VAC |
600VAC |
少於 7.5 mA |
47~70Hz |
500A |
KL20C75AX |
80TO 280VAC |
MAX 10 VDC |
1.5 Kohm |
75A |
24-280VAC |
600VAC |
少於 7.5 mA |
47~70Hz |
750A |
KL20C90AX |
80TO 280VAC |
MAX 10 VDC |
1.5 Kohm |
90A |
24-280VAC |
600VAC |
少於 7.5 mA |
47~70Hz |
900A |
KL20C100AX |
80TO 280VAC |
MAX 10 VDC |
1.5 Kohm |
100A |
24-280VAC |
600VAC |
少於 7.5 mA |
47~70Hz |
1000A |
KL20C125AX |
80TO 280VAC |
MAX 10 VDC |
1.5 Kohm |
125A |
24-280VAC |
600VAC |
少於 7.5 mA |
47~70Hz |
1250A |
|
| |
型號. |
瞬間電壓
變化率 |
通電之後
下降電壓 |
絕緣電阻 |
介質耐壓
輸入 - 輸出 |
輸出 / 入端 對外殼
的瞬間耐壓強度 |
動作時間 |
釋放時間
|
容量進出 |
重量 (g) |
KL20C10AX |
200  SEC |
2.0VACrms |
 ohm |
4000 VACrms |
2500 VACrms |
少於 2 mSec |
少於 1/2 循環 |
少於 15 PF |
95 g |
KL20C15AX |
200 SEC |
2.0VACrms |
ohm |
4000 VACrms |
2500 VACrms |
少於 2 mSec |
少於 1/2 循環 |
少於 15 PF |
95 g |
KL20C25AX |
200 SEC |
2.0VACrms |
ohm |
4000 VACrms |
2500 VACrms |
少於 2 mSec |
少於 1/2 循環 |
少於 15 PF |
100 g |
KL20C40AX |
200 SEC |
2.0VACrms |
ohm |
4000 VACrms |
2500 VACrms |
少於 2 mSec |
少於 1/2 循環 |
少於 15 PF |
100 g |
KL20C50AX |
200 SEC |
2.0VACrms |
ohm |
4000 VACrms |
2500 VACrms |
少於 2 mSec |
少於 1/2 循環 |
少於 15 PF |
100 g |
KL20C75AX |
200 SEC |
2.0VACrms |
ohm |
4000 VACrms |
2500 VACrms |
少於 2 mSec |
少於 1/2 循環 |
少於 15 PF |
100 g |
KL20C90AX |
200 SEC |
2.0VACrms |
ohm |
4000 VACrms |
2500 VACrms |
少於 2 mSec |
少於 1/2 循環 |
少於 15 PF |
100 g |
KL20C100AX |
200 SEC |
2.0VACrms |
ohm |
4000 VACrms |
2500 VACrms |
少於 2 mSec |
少於 1/2 循環 |
少於 15 PF |
100 g |
KL20C125AX |
200 SEC |
2.0VACrms |
ohm |
4000 VACrms |
2500 VACrms |
少於 2 mSec |
少於 1/2 循環 |
少於 15 PF |
100 g |
|
| |
| 外形尺寸圖 ( 單位:mm) |
 |
| |
| EQUIVALENT CIRCUIT |
 |
| |
| 特有曲線圖 |
|
| Attention: |
|
In order to be in compliance with the EMC
Directive an additional X2 capacitor at the
output is requried if the SSR is operated as
single component. In case the SSR is
incorporated in an appliance the existing
EMI filter may provide the required EMI
suppresion. The X2 capacitor must be
placed as close as possible to the output
|
| temminats. See also above. |
|
|
|
|
|
